Eutectic 23075
An Atomized Nickel-Alloy Powder Designed Primarily for use in the Spray and Fuse Process
Eutectic 23075 is a high performance atomized nickel alloy powder blended with carbide particles (sintered tungsten carbide cobalt powder) designed to produce hard coatings which offer excellent abrasion resistance. This blend is primarily used to produce a hot process spray and fuse coating which resists abrasion or erosion where the abrasive particulate is finer than about 200 mesh (0.0029 inch diameter). This powder can also be applied as a cold process coating over a bond coat to produce a gripping coating with a surface roughness of about 350 micro-inch RMS for applications which require moderate gripping action.
Description
Eutectic 23075 is a high performance atomized nickel alloy powder blended with carbide particles (sintered tungsten carbide cobalt powder) designed to produce hard coatings which offer excellent abrasion resistance. This blend is primarily used to produce a hot process spray and fuse coating which resists abrasion or erosion where the abrasive particulate is finer than about 200 mesh (0.0029 inch diameter). This powder can also be applied as a cold process coating over a bond coat to produce a gripping coating with a surface roughness of about 350 micro-inch RMS for applications which require moderate gripping action.
Applications
- Fan blades
- Slurry Pumps
- Harrows
- Fly-ash separators
- Pump cylinders
- Mixing auger blades
- Mud pumps
- Pump pistons
Related Documents
Technical Data
Macro-Hardness
58 HRC
Density
8.4 g/cc
Castolin Eutectic
