Eutectic 23065
High Performance, Fusible Nickel-Alloy Powder
Eutectic 23065 is an atomized, high performance alloy powder optimized for use with the TeroDyn® System 2000 or System 3000. It is a hot process spray and fuse powder primarily for use on steels and stainless steels where hardness and corrosion resistance are of prime importance. Eutectic 23065 contains alloying additions of molybdenum and copper which increase the plastic range during fusing and increase resistance to pitting in corrosive environments. Eutectic 23065 fused coatings are hard, dense and corrosion resistant.
Description
Eutectic 23065 is an atomized, high performance alloy powder optimized for use with the TeroDyn® System 2000 or System 3000. It is a hot process spray and fuse powder primarily for use on steels and stainless steels where hardness and corrosion resistance are of prime importance. Eutectic 23065 contains alloying additions of molybdenum and copper which increase the plastic range during fusing and increase resistance to pitting in corrosive environments. Eutectic 23065 fused coatings are hard, dense and corrosion resistant.
Applications
- Boiler feed pumps
- Feed screws
- Track rollers
- Steam valves
- Valve gates
- Coal pulverizer chutes
- Shredder knives
- Conveyor chute plates
- Valve housings
- Pump housings
- Plug valves
- Rope sheave guides
- Control gate valves
- Augers
- Dies
- Guides pins
- Turning discs
- Pick boxes
- Fly ash fans
- Pugmill knives
- Arbor plates
Related Documents
Technical Data
Typical Macro-Hardness
60 HRC
Typical Hot Hardness
Hardness is maintained to about 800°F after which it drops off at about 2.5% per 100°F
Castolin Eutectic
